Human Ditto Plushie

By Janet Carrillo "damn it Janet, let's crochet!"

SIZE/MEASUREMENTS
approx. 5"height x 3.75"length (12.7cm x 9.52cm)

...but can vary based on yarn and hook size.

MATERIALS

*Crochet hook size: 2.25mm (B)
*DK Weight Yarn: cream (40yds), white (11yds), violet (14yds), brown (38yds), black (7yds) & light yellow (9yds)

*Stitch Markers to mark your rounds

*8mm Safety Eyes

*Embroidery Floss: burgundy

*Fiberfill
*Tapestry Needle

*Wire

PATTERN NOTES - must-read...

 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There is no need to sl st and/or ch when going to the next round unless stated to do so.

 When a round or row mentions “around/across,” you will be working that whole sequence from that round/row around the entire piece. (EX: sc in next st, 2sc in next st, around = sc, inc, sc, inc,…)

SPECIAL STITCHES

Bobble Stitch (3dc bobble st) - Y/O hook, insert hook into stitch & pull up a loop. Y/O hook & pull through 2 loops on hook; 2 loops remaining. Y/O hook, insert hook in the same stitch & pull up a loop. Y/O hook & pull through 2 loops on hook; 3 loops remaining. Y/O hook, insert hook in the same stitch & pull up a loop. Y/O hook & pull through 2 loops on hook; 4 loops remaining. Y/O hook & pull through all 4 loops on the hook.

Invisible join - this VIDEO explains how to do this technique.

Single crochet 3 stitches together (sc3tog) - is a decrease over 3 stitches. Insert yarn thru 1st st, y/o pull thru, insert thru 2nd st, y/o pull thru, insert thru 3rd st, y/o pull thru, & y/o pull thru all 4 loops on hook.

Ditto Plushie

By Janet Carrillo "damn it Janet, let's crochet!"

SIZE/MEASUREMENTS
approx. 2"height x 3"length (5.08cm x 7.62cm)

...but can vary based on yarn and hook size.

MATERIALS
*Crochet hook size: 3.25mm (D)
*DK Weight Yarn: lavender/blue (25yds)
*Stitch Markers to mark your rounds

*8mm Safety Eyes

*Embroidery Floss: black

*Fiberfill
*Tapestry Needle

PATTERN NOTES - must-read...

 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There is no need to sl st and/or ch when going to the next round unless stated to do so.

 When a round or row mentions “around/across,” you will be working that whole sequence from that round/row around the entire piece. (EX: sc in next st, 2sc in next st, around = sc, inc, sc, inc,…)

SPECIAL STITCHES

Single crochet 3 stitches together (sc3tog) - is a decrease over 3sts. Insert yarn thru 1st st, y/o pull thru, insert thru 2nd st, y/o pull thru, insert thru 3rd st, y/o pull thru, & y/o pull thru all 4 loops on hook.

super bulky weight yarn (38yds) with 5.5mm (I) hook and 12mm eyes.

approx. size: 4"height x 5.25"length (10.16cm x 13.33cm)

Mew Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season, depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics: knit, purl, and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Main Color & small amounts of light pink, white, black, & light blue
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch: HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to determine which rows to apply the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor, but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Mew and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (February 2026). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern, but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Slowpoke Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season, depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics: knit, purl, and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: salmon & small amounts of cream, white, brown, & a different shade of pink for the mouth
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch: HERE.

With a lighter shade of pink for the mouth.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to determine which rows to apply the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

NOTE: The ears are worked all in one piece and then folded in half.

EARS starting with salmon; make 2

CO 4 stitches with the 5.0mm needles

  Row 1: kfb, k2, kfb (6sts)

  Row 2: kfb, p4, kfb (8sts)

  Row 3: kfb, k6, kfb (10sts)

  Row 4: kfb, p8, kfb (12sts)

  Row 5: kfb, k10, kfb (14sts)

  Row 6: purl across (14sts)

  Row 7: knit across (14sts)

  Row 8: purl across (14sts)

  Row 9: knit across (14sts)

  Row 10: p2tog, p10, p2tog (12sts)

  Row 11: knit across (12sts)

  Row 12: purl across (12sts)

  Row 13: purl across (12sts)

  Row 14: purl across (12sts)

  Row 15: knit across (12sts)

  Row 16: kfb, p10, kfb (14sts)

  Row 17: knit across (14sts)

  Row 18: purl across (14sts)

  Row 19: knit across (14sts)

  Row 20: purl across (14sts)

  Row 21: k2tog, k10, k2tog (12sts)

  Row 22: p2tog, p8, p2tog (10sts)

  Row 23: k2tog, k6, k2tog (8sts)

  Row 24: p2tog, p4, p2tog (6sts)

  Row 25: k2tog, k2, k2tog (4sts)

Cast off all stitches. Weave in the ends. Fold the ear in half along row 13. Using the 3.75mm (F) crochet hook, single crochet along the entire ear to close it off. F/O, weave in all ends. Another method you can use if you're not comfortable with crocheting, use a tapestry needle and whip stitch along the entire ear to close it off.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing.

     EARS...lay out the beanie flat and find the position you like best.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor, but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Slowpoke and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (February 2026). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern, but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Pokeball Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Red or Purple, White, Black, and Pink
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch: HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

SPOTS for the master ball make 2

CO 32 stitches with 4.5mm needles

  Rnd 1: k around

  Rnd 2: K6, k2tog

  Rnd 3: K5, k2tog

  Rnd 4: K4, k2tog

  Rnd 5: K3, k2tog

  Rnd 6: K2, k2tog

  Rnd 7: K1, k2tog

  Rnd 8: K2tog

Cast off all stitches. Weave in the ends.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).

     EARS...lay out the beanie flat and find the position you like best.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Pokeball and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (November 2016). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Pokeball Earflap Beanie

By Janet Carrillo "damn it Janet, let's crochet!"

SIZE/MEASUREMENTS

Toddler (12 months - 3yrs) [18" to 19.5" head circumference]
Child/Small Adult [20" to 21.5" head circumference]

MATERIALS
*Crochet hook size: 4.0mm (G) & 5.0mm (H)
*Worsted Weight Yarn: Red, Purple, Black, White, & Pink
*Stitch Markers to mark your rounds
*Tapestry needle
*Matching thread

GAUGE

3 hdc stitches x 2.5 rows = 1"

At the end of round 8, laying flat = 6.25" in diameter

Don’t forget to check your gauge.

PATTERN NOTES

 Numbers in ( ) at the end of each round/row indicate the total number of stitches.

 Always use stitch markers to mark your rounds.

 The ch 2 at the beginning of each round counts as 1 hdc.

 You slip stitch on the top of the chain 2.

 When a round or row mentions “around/across” you will be working that whole sequence from that round/row around the entire piece. (EX: sc in next st, 2sc in next st, around = sc, inc, sc, inc,…)

SPECIAL STITCHES

Invisible join - this VIDEO explains how to do this technique.

** Toddler **

BEANIE starting with red or purple; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 27 sts, *2hdc in next st, hdc in next 27 sts* repeat from * to * around, sl st on top of ch 2 (58)
  Rnd 9-10: ch2, hdc in each st around, sl st on top of ch 2, in last st change to black (58)

  Rnd 11: ch2, hdc in each st around, sl st on top of ch 2, in last st change to white (58)

  Rnd 12-16: ch2, hdc in each st around, sl st on top of ch 2 (58)
Do not F/O, continue on to making the first earflap.

1st EARFLAP with white; 5.0mm (H)
  Row 1: ch1, sc in next 10 sts, ch1, turn (10)
  Row 2-3: sc in each st across, ch1, turn (10)
  Row 4: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 5: sc in each st across, ch1, turn (8)
  Row 6: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 7: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 8: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with white; 5.0mm (H)
Count to the left 18sts (not including the 10 sts from the first earflap). Attach on the 19th stitch.

Repeat rows 1-8 from the first earflap.

F/O, secure and weave in the ends

EDGING with white; 5.0mm (H)
Attach yarn in any st and ch1, sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.

** Child / Small Adult **

BEANIE starting with red or purple; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 6 sts, *2hdc in next st, hdc in next 6 sts* repeat from * to * around, sl st on top of ch 2 (64)
  Rnd 9: ch2, hdc in same st you sl st, hdc in next 15 sts, *2hdc in next st, hdc in next 15 sts* repeat from * to * around, sl st on top of ch 2 (68)
  Rnd 10-12: ch2, hdc in each st around, sl st on top of ch 2, in last st change to black (68)

  Rnd 13: ch2, hdc in each st around, sl st on top of ch 2, in last st change to white (68)

  Rnd 14-19: ch2, hdc in each st around, sl st on top of ch 2 (68)
Don’t F/O, continue to make the first earflap.

1st EARFLAP with white; 5.0mm (H)
  Row 1: ch1, sc in next 12 sts, ch1, turn (12)
  Row 2-3: sc in each st across, ch1, turn (12)
  Row 4: sc2tog, sc in next 8 sts, sc2tog, ch1, turn (10)
  Row 5: sc in each st across, ch1, turn (10)
  Row 6: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 7: sc in each st across, ch 1, turn (8)
  Row 8: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 9: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 10: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with white; 5.0mm (H)
Count to the left 23 sts (not including the 12 from the first earflap). Attach the yarn on 24th stitch.

Repeat rows 1-10 from the first earflap.

F/O, secure and weave in the ends.

EDGING with white; 5.0mm (H)
Attach yarn in any stitch and ch1, sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.


BUTTON starting with white; 4.0mm (G)

  Rnd 1: 4sc in a magic ring, sl st into 1st st (4)

  Rnd 2: ch1, 2sc in each st around, sl st into 1st st (8)

  Rnd 3: ch1, sc in next st, 2sc in next st, around, sl st into 1st st, in last st change to black (12)

  Rnd 4: back loops for this round only sl st in each st around, sl st into 1st st, in last st change to white (12)

  Rnd 5: back loops for this round only from rnd 3 ch1, sc in next 2 sts, 2sc in next st, around, sl st into 1st st (16)

  Rnd 6: ch1, sc in next 3 sts, 2sc in next st, around, sl st into 1st st, in last st change to black (20)

  Rnd 7: back loops for this round only sl st in each st around, sl st into 1st st (20)

  Rnd 8: back loops for this round only ch1, sc in next 4 sts, 2sc in next st, around, sl st into 1st st, in last st change to black (24)

F/O, secure and leave a long tail for sewing.

SPOT for master ball with pink; 4.0mm (G)

  Rnd 1: 6hdc in a magic ring, sl st into 1st st (6)

  Rnd 2: ch1, *2hdc in each st around,* sl st into 1st st (12)

  Rnd 3: ch1, *hdc in next st, 2hdc in next st,* around, sl st into 1st st (18)

  Rnd 4: ch1, *hdc in next 2 sts, 2hdc in next st,* around, sl st into 1st st (24)

F/O, secure and leave a long tail for sewing. 

BRAIDS
Cut 18 pieces of yarn (9 for each earflap) about 36 inches long. Fold each bunch in half and push the folded end through an opening in the bottom of each earflap. Pull the unfolded ends through the loop and pull tight. Braid the strands and tie a knot to secure the braid. Complete the second braid the same way.

ASSEMBLE

     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing.
      BUTTON... place it in the center of the beanie. Between rounds 9 and 13 for the toddler size.

Between rounds 11 and 15 for the child/adult size.

      SPOTS for the master ball... place them on the sides between rounds 5 and 8 or in the position you like best.

GLOSSARY:

ch/s: chain/s || dc: double crochet || f/o: finish off || hdc: half double crochet || rnd: round || sc: single crochet

sc2tog: single crochet 2 stitches together || sl st: slip stitch || st/s: stitch/es || y/o: yarn over 

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice crochet time!
- Janet

Pokeball and Pokémon are copyrighted by The Pokémon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (September 2025). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Pikachu Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Yellow & small amounts of black, white, red and brown
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

EARS make 2

CO 10 sts on 4.5mm needles with yellow yarn (leave a long tail to sew ears in place)

  Rnd 1-4: knit around (10)

  Rnd 5: k4, kfb, k4, kfb (12)

  Rnd 6-13: knit around (12)

  Rnd 14: k4, k2tog, k4, k2tog (10)

  Rnd 15: k3, k2tog, k3, k2tog (8)

Change to black yarn. F/O the yellow yarn, secure and hide inside the ear.

  Rnd 16-18: knit around (8)

  Rnd 19: k2, k2tog, k2, k2tog (6)

  Rnd 20: k1, k2tog, k1, k2tog (4)

Leave a tail. You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in. 

ASSEMBLE
     I recommend pinning the pieces before sewing them to ensure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).

     EARS...lay out the beanie flat and find the position you like best. If you like, you can lightly stuff the ears. I left mine unstuffed.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || kfb: knit front back || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Pikachu and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (September 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Pikachu Earflap Beanie (Pokemon)

By Janet Carrillo "damn it Janet, let's crochet!"

Stay cozy and cute with this handmade Pikachu beanie, perfect for every Pokemon Fan!

SIZE/MEASUREMENTS

Toddler (12 months - 3yrs) [18" to 19.5" head circumference]
Child/Small Adult [20" to 21.5" head circumference]

MATERIALS
*Crochet hook size: 3.75mm (F) & 5.0mm (H)
*Worsted Weight Yarn: Yellow, Black & Red
*Stitch Markers to mark your rounds
*Tapestry needle
*Matching thread

*2 white buttons (diameter of 11mm) or white felt

*Black embroidery floss

GAUGE

3 hdc stitches x 2.5 rows = 1"

At the end of round 8, laying flat = 6.25" in diameter

Don’t forget to check your gauge.

PATTERN NOTES

 Numbers in ( ) at the end of each round/row indicate the total number of stitches.

 Always use stitch markers to mark your rounds.

 The ch 2 at the beginning of each round counts as 1 hdc.

 You slip stitch on the top of the chain 2.

 When a round or row mentions “around/across” you will be working that whole sequence from that round/row around the entire piece. (EX: sc in next st, 2sc in next st, around = sc, inc, sc, inc,…)

SPECIAL STITCHES

Invisible join - this VIDEO explains how to do this technique.

** Toddler **

BEANIE with yellow; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 27 sts, *2hdc in next st, hdc in next 27 sts* repeat from * to * around, sl st on top of ch 2 (58)
  Rnd 9-16: ch2, hdc in each st around, sl st on top of ch 2 (58)
Do not F/O, continue on to making the first earflap.

1st EARFLAP with yellow
  Row 1: ch1, sc in next 10 sts, ch1, turn (10)
  Row 2-3: sc in each st across, ch1, turn (10)
  Row 4: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 5: sc in each st across, ch1, turn (8)
  Row 6: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 7: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 8: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with yellow
Count to the left 18sts (not including the 10 sts from the first earflap). Attach on the 19th stitch.

Repeat rows 1-8 from the first earflap.

F/O, secure and weave in the ends

EDGING with yellow
Attach yarn in any st and ch1, sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.

** Child / Small Adult **

BEANIE with yellow; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 6 sts, *2hdc in next st, hdc in next 6 sts* repeat from * to * around, sl st on top of ch 2 (64)
  Rnd 9: ch2, hdc in same st you sl st, hdc in next 15 sts, *2hdc in next st, hdc in next 15 sts* repeat from * to * around, in the last st change to black, sl st on top of ch 2 (68)
  Rnd 10-19: ch2, hdc in each st around, sl st on top of ch 2 (68)
Don’t F/O, continue to make the first earflap.

1st EARFLAP with yellow
  Row 1: ch1, sc in next 12 sts, ch1, turn (12)
  Row 2-3: sc in each st across, ch1, turn (12)
  Row 4: sc2tog, sc in next 8 sts, sc2tog, ch1, turn (10)
  Row 5: sc in each st across, ch1, turn (10)
  Row 6: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 7: sc in each st across, ch 1, turn (8)
  Row 8: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 9: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 10: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with yellow
Count to the left 23 sts (not including the 12 from the first earflap). Attach the yarn on 24th stitch.

Repeat rows 1-10 from the first earflap.

F/O, secure and weave in the ends.

EDGING with yellow
Attach yarn in any stitch and ch1, sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.

EARS starting with black, 3.75mm (F), make 2

 Rnd 1: 4sc in magic ring (4)

 Rnd 2: sc in next st, 2sc in next st, around (6)

 Rnd 3: sc in next 2 sts, 2sc in next st, around (8)

 Rnd 4-5: sc in each st around, in last st of rnd 5 change to yellow (8)

 Rnd 6: sc in next 3 sts, 2sc in next st, around (10)

 Rnd 7: sc in next 4 sts, 2sc in next st, around (12)

 Rnd 8-15: sc in each st around

 Rnd 16: sc in next 4 sts, sc2tog, around (10)

 Rnd 17-19: sc in each st around (10)

F/O, secure and weave in the ends.

EYES with black, 3.75mm (F), make 2

 Rnd 1: 6sc in magic ring (6)

 Rnd 2: 2sc in each st around (12)

 Rnd 3: sc in next st, 2sc in next st, around, join with an invisible join to the 1st st (18)

F/O, secure and weave in the ends.

CHEEKS with red, 3.75mm (F), make 2

 Rnd 1: 5sc in magic ring (5)

 Rnd 2: 2sc in each st around (10)

 Rnd 3: sc in next st, 2sc in next st, around (15)

 Rnd 4: sc in each st around, join with an invisible join to the 1st st (18)

F/O, secure and weave in the ends.

NOSE with black, 3.75mm (F)

 Rnd 1: sc, hdc, sc, hdc, sc, hdc, sc in magic ring and join with an invisible join to the 1st st (7)

Pull as tightly as possible so no hole is showing through. F/O, secure and weave in the ends.

BRAIDS
Cut 18 pieces of yarn (9 for each earflap) about 36 inches long. Fold each bunch in half and push the folded end through an opening in the bottom of each earflap. Pull the unfolded ends through the loop and pull tight. Braid the strands and tie a knot to secure the braid. Complete the second braid the same way.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).
     EARS...there's no need to stuff them, simply flatten them out and place them....

toddler: between rounds 5 and 6.

child/adult: between rounds 6 and 7.

Toddler                                       Child/adult

     CHEEKS...place them between rounds 12 and 14; approx. 3.5" apart for toddler size.

Place them between rounds 14 and 16; approx. 4.5" apart for child/adult size.

     EYES...place them between rounds 7 and 9; approx. 1.75" apart and approx .75" inward from the cheeks for toddler size.

Place them between rounds 9 and 11; approx. 3.8" apart and approx .75" inward from the cheeks for child/adult size.

     NOSE... find the center between the eyes and place it between...

toddler: rounds 11 and 12.

child/adult: rounds 12 and 13.

     PUPILS...using white felt make 2 small circles and place them on the black crochet circles.

     MOUTH...child/adult size: using black thread or embroidery floss to make its mouth on round 14 for the toddler size and round 15 for the child/adult size. You can play around with it and make it however you like, the possibilities are endless.

Toddler                                       Child/adult

Would you like to make a cute cuddly Pikachu plushie to go with the beanie?😊

Or some matching slippers?

You can find the plushie pattern... --> HERE

& the slipper pattern --> toddler size or child/teen size

GLOSSARY:

ch/s: chain/s || f/o: finish off || hdc: half double crochet || rnd: round || sc: single crochet

sc2tog: single crochet 2 stitches together || sl st: slip stitch || st/s: stitch/es || y/o: yarn over 

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice crochet time!
- Janet

Pikachu and Pokémon are copyrighted by The Pokémon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (August 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Snorlax Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: windsor blue & small amounts of cream, black & white
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with windsor blue yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rnds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

NOTE: The ears are worked all in one piece and then folded in half.

EARS with windsor blue; make 2

CO 1 stitch with the 5.0mm needles

  Row 1: kfb (2sts)

  Row 2: knit across (2sts)

  Row 3: kfb, kfb (4sts)

  Row 4: knit across (4sts)

  Row 5: kfb, p2, kfb (6sts)

  Row 6: kfb, k4, kfb (8sts)

  Row 7: kfb, p6, kfb (10sts)

  Row 8: knit across (10sts)

  Row 9: purl across (10sts)

  Row 10: knit across (10sts)

  Row 11: purl across (10sts)

  Row 12: knit across (10sts)

  Row 13: purl across (10sts)

  Row 14: knit across (10sts)

  Row 15: purl across (10sts)

  Row 16: purl across (10sts)

  Row 17: purl across (10sts)

  Row 18: knit across (10sts)

  Row 19: purl across (10sts)

  Row 20: knit across (10sts)

  Row 21: purl across (10sts)

  Row 22: knit across (10sts)

  Row 23: purl across (10sts)

  Row 24: k2tog, k6, k2tog (8sts)

  Row 25: p2tog, p4, p2tog (6sts)

  Row 26: k2tog, k2, k2tog (4sts)

  Row 27: purl across (4sts)

  Row 28: k2tog x2 (2sts)

  Row 29: purl across (2sts)

  Row 30: slip1, knit 1, psso

F/O and draw through the remaining stitch. Weave in the ends.

Fold the ear in half along row 16. Using the 3.75mm (F) crochet hook, single crochet along the entire ear to close it off. F/O, weave in all ends.

Another method you can use if you're not comfortable crocheting, use a tapestry needle and whip stitch along the entire ear to close it off.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).

     EARS...lay out the beanie flat and find the position you like best.

Note: right-click on the image and open the image in a new tab to enlarge and print out.
The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

co: cast on || k: knit || k2tog: knit 2 stitches together || kfb: knit front and back || p: purl

p2tog: purl 2 stitches together || psso: pass slipped stitch over || rnd/s: round/s || st/s: stitch/es

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Janet

Snorlax and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (April 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Round Plush Snorlax (Pokemon)

 By Janet Carrillo "damn it Janet, let's crochet!"

     For those who love cute things, Snorlax is the perfect size to hold on to your palm or attach to your bag as a keychain and be your traveling companion. You can also make a small blanket and attach him to make a lovey for your little one.

SIZE/MEASUREMENTS
approx. 4"height x 4"length

MATERIALS
*Crochet hook size: 3.5mm (E)
*Worsted Weight Yarn: Windsor Blue (45yds) & Aran (5yds)
*Stitch Markers to mark your rounds
*Felt: Aran & Light Brown
*Fiberfill
*Tapestry Needle
*Matching Thread
*Hot Glue

PATTERN NOTES - must-read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first sc, not on top of the chain 1.

SPECIAL STITCHES

Invisible join - this VIDEO explains how to do this technique.

HEAD/BODY with windsor blue
  Rnd 1: 6sc in magic ring (6)
  Rnd 2: 2sc in each st around (12)
  Rnd 3: sc in next st, 2sc in next st around (18)
  Rnd 4: sc in next 2 sts, 2sc in next st around (24)
  Rnd 5: sc in next 3 sts, 2sc in next st around (30)
  Rnd 6: sc in next 4 sts, 2sc in next st around (36)
  Rnd 7: sc in next 11 sts, 2sc in next st around (39)
  Rnd 8-16: sc in each st around (39)
  Rnd 17: sc in next 11 sts, sc2tog around (36)
  Rnd 18: sc in next 4 sts, sc2tog around (30)
  Rnd 19: sc in next 3 sts, sc2tog around (24)
Start stuffing the head/body moderately firm.
  Rnd 20: sc in next 2 sts, sc2tog around (18)
  Rnd 21: sc in next st, sc2tog around (12)
  Rnd 22: sc2tog around (6)
F/O and leave a tail for closing. Add any bits of stuffing needed to finish shaping the head/body. Weave in the tail through the final round and draw up tight to close. Secure and weave in the ends.

EARS with windsor blue; make 2

  Rnd 1: 4sc in magic ring (4)

  Rnd 2: sc in next st, 2sc in next st around (6)

  Rnd 3: sc in next 2 sts, 2sc in next st around (8)

  Rnd 4: sc in next 3 sts, 2sc in next st around (10)

  Rnd 5: sc in each st around, join to the 1st st with the invisible join (10)

F/O, secure and weave in the ends.

ARMS with windsor blue; make 2

  Rnd 1: 5sc in magic ring (5)

  Rnd 2-3: sc in each st around (5)

  Rnd 4: sc2tog, sc in next 3 sts (4)

F/O, secure and weave in the ends.

FEET with aran; make 2

  Rnd 1: 6sc in magic ring (6)

  Rnd 2: sc in next st, 2sc in next st around (9)

  Rnd 3: sc in each st around (9)

Stuff the feet lightly.

  Rnd 4: sc in next st, sc2tog in next st around (6)

F/O, secure and weave in the ends.


ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).
     TIP...For anything that I’m going to be using felt, I like to first sketch it out on white paper and make a stencil of what I need. Then cut it out. Then tape the stencil to the felt and cut it out.
     HEAD/BODY PATCH…using an aran color felt, create the center patch. I made 2 circles intertwined and cut out a triangle on top for the face. Before gluing it in place, embroider the eyes, mouth, and teeth using embroidery floss/thread or yarn. Place it between rounds 6 and 17.

     FEET…if you have not to stuff them yet, do so now. Place them between rounds 18 and 19. With light brown felt cut out 2 small circles and glue them at the bottom of the feet.

     EARS...if you have not stuffed them yet, do so now. Place them between rounds 4 and 7.

     ARMS...theirs no need to stuff them. Align them to the ears and place them on rounds 12 and 13.

GLOSSARY:

f/o: finish off || rnd: round || sc: single crochet || sc2tog: single crochet 2 stitches together || st/s: stitch/es

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice crochet time!
- Janet

Snorlax and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (March 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.