Mew Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season, depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics: knit, purl, and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Main Color & small amounts of light pink, white, black, & light blue
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch: HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to determine which rows to apply the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor, but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Mew and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (February 2026). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern, but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Slowpoke Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season, depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics: knit, purl, and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: salmon & small amounts of cream, white, brown, & a different shade of pink for the mouth
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch: HERE.

With a lighter shade of pink for the mouth.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to determine which rows to apply the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

NOTE: The ears are worked all in one piece and then folded in half.

EARS starting with salmon; make 2

CO 4 stitches with the 5.0mm needles

  Row 1: kfb, k2, kfb (6sts)

  Row 2: kfb, p4, kfb (8sts)

  Row 3: kfb, k6, kfb (10sts)

  Row 4: kfb, p8, kfb (12sts)

  Row 5: kfb, k10, kfb (14sts)

  Row 6: purl across (14sts)

  Row 7: knit across (14sts)

  Row 8: purl across (14sts)

  Row 9: knit across (14sts)

  Row 10: p2tog, p10, p2tog (12sts)

  Row 11: knit across (12sts)

  Row 12: purl across (12sts)

  Row 13: purl across (12sts)

  Row 14: purl across (12sts)

  Row 15: knit across (12sts)

  Row 16: kfb, p10, kfb (14sts)

  Row 17: knit across (14sts)

  Row 18: purl across (14sts)

  Row 19: knit across (14sts)

  Row 20: purl across (14sts)

  Row 21: k2tog, k10, k2tog (12sts)

  Row 22: p2tog, p8, p2tog (10sts)

  Row 23: k2tog, k6, k2tog (8sts)

  Row 24: p2tog, p4, p2tog (6sts)

  Row 25: k2tog, k2, k2tog (4sts)

Cast off all stitches. Weave in the ends. Fold the ear in half along row 13. Using the 3.75mm (F) crochet hook, single crochet along the entire ear to close it off. F/O, weave in all ends. Another method you can use if you're not comfortable with crocheting, use a tapestry needle and whip stitch along the entire ear to close it off.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing.

     EARS...lay out the beanie flat and find the position you like best.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor, but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Slowpoke and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (February 2026). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern, but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Among Us Earflap Beanie

By Janet Carrillo "damn it Janet, let's crochet!"

SIZE/MEASUREMENTS

Toddler (12 months - 3yrs) [18" to 19.5" head circumference]
Child/Small Adult [20" to 21.5" head circumference]

MATERIALS
*Crochet hook size: 3.75mm (F) & 5.0mm (H)
*Worsted Weight Yarn: main color, light blue, white, light gray & black
*Stitch Markers to mark your rounds
*Tapestry needle
*Matching thread

GAUGE

3 hdc stitches x 2.5 rows = 1"

At the end of round 8, laying flat = 6.25" in diameter

Don’t forget to check your gauge.

PATTERN NOTES

 Numbers in ( ) at the end of each round/row indicate the total number of stitches.

 Always use stitch markers to mark your rounds.

 The chain 2 at the beginning of each round counts as 1 hdc.

 You slip stitch on the top of the chain 2.

 When a round or row mentions “around/across” you will be working that whole sequence from that round/row around the entire piece. (EX: sc in next st, 2sc in next st, around = sc, inc, sc, inc,…)

SPECIAL STITCHES

Invisible join - this VIDEO explains how to do this technique.

Other side of the foundation chains - this VIDEO explains how to do this technique.

** Toddler **

BEANIE with main color; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 27 sts, *2hdc in next st, hdc in next 27 sts* repeat from * to * around, sl st on top of ch 2 (58)
  Rnd 9-16: ch2, hdc in each st around, sl st on top of ch 2 (58)
Do not F/O, continue on to making the first earflap.

1st EARFLAP with main color; 5.0mm (H)
  Row 1: ch1, sc in next 10 sts, ch1, turn (10)
  Row 2-3: sc in each st across, ch1, turn (10)
  Row 4: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 5: sc in each st across, ch1, turn (8)
  Row 6: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 7: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 8: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with main color; 5.0mm (H)
Count to the left 18sts (not including the 10 sts from the first earflap). Attach on the 19th stitch.

Repeat rows 1-8 from the first earflap.

DO NOT F/O continue on to the edging.

EDGING with main color; 5.0mm (H)
ch1, turn, sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.

** Child / Small Adult **

BEANIE with main color; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 6 sts, *2hdc in next st, hdc in next 6 sts* repeat from * to * around, sl st on top of ch 2 (64)
  Rnd 9: ch2, hdc in same st you sl st, hdc in next 15 sts, *2hdc in next st, hdc in next 15 sts* repeat from * to * around, sl st on top of ch 2 (68)
  Rnd 10-19: ch2, hdc in each st around, sl st on top of ch 2 (68)
Don’t F/O, continue to make the first earflap.

1st EARFLAP with main color; 5.0mm (H)
  Row 1: ch1, sc in next 12 sts, ch1, turn (12)
  Row 2-3: sc in each st across, ch1, turn (12)
  Row 4: sc2tog, sc in next 8 sts, sc2tog, ch1, turn (10)
  Row 5: sc in each st across, ch1, turn (10)
  Row 6: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 7: sc in each st across, ch 1, turn (8)
  Row 8: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 9: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 10: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with main color; 5.0mm (H)
Count to the left 23 sts (not including the 12 from the first earflap). Attach the yarn on 24th stitch.

Repeat rows 1-10 from the first earflap.

DO NOT F/O continue on to the edging.

EDGING with main color; 5.0mm (H)
ch1, turn, sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.


GLASS PART starting with light blue with; 3.75mm (F)

  Rnd 1: ch13, 2sc in next st, sc in next 10 sts, 4sc in last st, other side of the foundation chains sc in next 10 sts, 2sc in next st (28)

  Rnd 2: 2sc in next 2 sts, sc in next 10 sts, 2sc in next 4 sts, sc in next 10 sts, 2sc in next 2 sts (36)

  Rnd 3: sc in next 2 sts, 2sc in next st, in last st change to white sc in next 5 sts, in last st change to light blue sc in next 7 sts, 2sc in next st, sc in next 4 sts, 2sc in next st, sc in next 12 sts, 2sc in next st, sc in next 2 sts (40)

  Rnd 4: 2sc in next st, sc in next 3 sts, in last st change to white, sc in next st, 2sc in next st, sc in next 3 sts, in last st change to light blue, sc in next 6 sts, *2sc in next st, sc in next 4 sts* repeat from * to * 1 more time, 2sc in next st, sc in next 9 sts, 2sc in next st, sc in next 4 sts (46)

F/O the white yarn, secure and weave in the ends.

  Rnd 5: sc in next 5 sts, 2sc in next st, sc in next 13 sts, 2sc in next st, sc in next 4 sts, in last st change to light grey sc in next 4 sts, 2sc in next st, sc in next 12 sts, in last st change to light blue sc in next st, 2sc in next st, sc in next 3 sts (50)

  Rnd 6: sc in next 25 sts, in last st change to light grey sc in next 19 sts, in last st change to light blue sc in next 6 sts, join with an invisible join to the 1st st (50)

F/O, secure and weave in the ends. Attach the black yarn to the 1st stitch.

  Rnd 7: loosely sl st around the entire piece, join with an invisible join to the 1st st (50)

F/O, secure and weave in the ends.

BRAIDS
Cut 18 pieces of yarn (9 for each earflap) about 36 inches long. Fold each bunch in half and push the folded end through an opening in the bottom of each earflap. Pull the unfolded ends through the loop and pull tight. Braid the strands and tie a knot to secure the braid. Complete the second braid the same way.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).
     GLASS PART...find the center of the beanie and place it between rounds 8 and 14 for toddler size.

Place it between rounds 10 and 16 for child/adult size.

GLOSSARY:

ch/s: chain/s || f/o: finish off || hdc: half double crochet || rnd: round || sc: single crochet

sc2tog: single crochet 2 stitches together || sl st: slip stitch || st/s: stitch/es

Remember to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice crochet time!
- Janet

Among Us is copyrighted by American game studio Innersloth.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (February 2025). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Among Us Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Main Color & small amounts of black, white, yellow, cream, green, gold, etc...

*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Version 1

Version 2

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Remember to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Among Us is copyrighted by American game studio Innersloth.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (February 2025). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Sonic & Knuckles Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Main Color & small amounts of black, blue, beige, white, red, yellow & green
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

Note: right-click on the image and open the image in a new tab to enlarge and print out.

The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Sonic

Knuckles

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Remember to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Sonic and Knuckles are copyrighted by Sega.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (January 2025). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Five Nights at Freddy's Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Main Color & small amounts of brown, beige, black, white, light blue, purple, lilac, red, canary yellow, fuchsia, light orange, lavender and red wine
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rounds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

Note: right-click on the image and open the image in a new tab to enlarge and print out.
The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Five Nights at Freddy's is copyrighted by Scott Cawthorn.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (June 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Snorlax Earflap Beanie (Pokemon)

By Janet Carrillo "damn it Janet, let's crochet!"

Get ready to snooze in style with this adorable crochet Snorlax beanie!💤

SIZE/MEASUREMENTS

Toddler (12 months - 3yrs) [18" to 19.5" head circumference]
Child/Small Adult [20" to 21.5" head circumference]

MATERIALS
*Crochet hook size: 3.75mm (F) & 5.0mm (H)
*Worsted Weight Yarn: Windsor Blue, Cream & Black
*Stitch Markers to mark your rounds

*Felt: White
*Tapestry needle
*Matching thread

GAUGE

3 hdc stitches x 2.5 rows = 1"

At the end of round 8, laying flat = 6.25" in diameter

Don’t forget to check your gauge.

PATTERN NOTES

 Numbers in ( ) at the end of each round/row indicate the total number of stitches.

 Always use stitch markers to mark your rounds.

 The ch 2 at the beginning of each round counts as 1 hdc.

 You slip stitch on the top of the chain 2.

 When a round or row mentions “around/across” you will be working that whole sequence from that round/row around the entire piece. (EX: sc in next st, 2sc in next st, around = sc, inc, sc, inc,…)

SPECIAL STITCHES

Invisible join - this VIDEO explains how to do this technique.

Single crochet 3 stitches together (sc3tog) – is a decrease over 3sts. Insert yarn thru 1st st, y/o pull thru, insert thru 2nd st, y/o pull thru, insert thru 3rd st, y/o pull thru, & y/o pull thru all 4 loops on hook.

** Toddler **

BEANIE with windsor blue; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 27 sts, *2hdc in next st, hdc in next 27 sts* repeat from * to * around, sl st on top of ch 2 (58)
  Rnd 9-16: ch2, hdc in each st around, sl st on top of ch 2 (58)
Do not F/O, continue on to making the first earflap.

1st EARFLAP with windsor blue
  Row 1: ch1, sc in next 10 sts, ch1, turn (10)
  Row 2-3: sc in each st across, ch1, turn (10)
  Row 4: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 5: sc in each st across, ch1, turn (8)
  Row 6: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 7: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 8: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with windsor blue
Count to the left 18sts (not including the 10 sts from the first earflap). Attach on the 19th stitch.

Repeat rows 1-8 from the first earflap.

Do not F/O, ch1, turn

EDGING with windsor blue
sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.

** Child / Small Adult **

BEANIE with windsor blue; 5.0mm (H)
  Rnd 1: 8hdc in magic ring, sl st into 1st st (8)
  Rnd 2: ch2, hdc in same st you sl st, *2hdc in next st* repeat from * to * around, sl st on top of ch 2 (16)
  Rnd 3: ch2, hdc in same st you sl st, hdc in next st, *2hdc in next st, hdc in next st* repeat from * to * around, sl st on top of ch 2 (24)
  Rnd 4: ch2, hdc in same st you sl st, hdc in next 2 sts, *2hdc in next st, hdc in next 2 sts* repeat from * to * around, sl st on top of ch 2 (32)
  Rnd 5: ch2, hdc in same st you sl st, hdc in next 3 sts, *2hdc in next st, hdc in next 3 sts* repeat from * to * around, sl st on top of ch 2 (40)
  Rnd 6: ch2, hdc in same st you sl st, hdc in next 4 sts, *2hdc in next st, hdc in next 4 sts* repeat from * to * around, sl st on top of ch 2 (48)
  Rnd 7: ch2, hdc in same st you sl st, hdc in next 5 sts, *2hdc in next st, hdc in next 5 sts* repeat from * to * around, sl st on top of ch 2 (56)
  Rnd 8: ch2, hdc in same st you sl st, hdc in next 6 sts, *2hdc in next st, hdc in next 6 sts* repeat from * to * around, sl st on top of ch 2 (64)
  Rnd 9: ch2, hdc in same st you sl st, hdc in next 15 sts, *2hdc in next st, hdc in next 15 sts* repeat from * to * around, sl st on top of ch 2 (68)
  Rnd 10-19: ch2, hdc in each st around, sl st on top of ch 2 (68)
Don’t F/O, continue to make the first earflap.

1st EARFLAP with windsor blue
  Row 1: ch1, sc in next 12 sts, ch1, turn (12)
  Row 2-3: sc in each st across, ch1, turn (12)
  Row 4: sc2tog, sc in next 8 sts, sc2tog, ch1, turn (10)
  Row 5: sc in each st across, ch1, turn (10)
  Row 6: sc2tog, sc in next 6 sts, sc2tog, ch1, turn (8)
  Row 7: sc in each st across, ch 1, turn (8)
  Row 8: sc2tog, sc in next 4 sts, sc2tog, ch1, turn (6)
  Row 9: sc2tog, sc in next 2 sts, sc2tog, ch1, turn (4)
  Row 10: sc2tog, sc2tog (2)
F/O, secure and weave in the ends.

2nd EARFLAP with windsor blue
Count to the left 23 sts (not including the 12 from the first earflap). Attach the yarn on 24th stitch.

Repeat rows 1-10 from the first earflap.

Do not F/O, ch1, turn

EDGING with windsor blue
sc in each st around; working evenly around each earflap. Remember to mark your round with a stitch marker. Do another round of sc around the entire beanie. Join with an invisible join to the 1st st.
F/O, secure and weave in the ends.


EARS with windsor blue; make 2, 3.75mm (F) hook

  Rnd 1: 6sc in magic ring (6)

  Rnd 2: sc in next 2 sts, 2sc in next st around (8)

  Rnd 3: sc in next 3 sts, 2sc in next st around (10)

  Rnd 4: sc in next 4 sts, 2sc in next st around (12)

  Rnd 5: sc in next 5 sts, 2sc in next st around (14)

  Rnd 6: sc in next 6 sts, 2sc in next st around (16)

  Rnd 7: sc in next 7 sts, 2sc in next st around (18)

  Rnd 8: sc in next 8 sts, 2sc in next st around (20)

  Rnd 9-11: sc in each st around, join with an invisible join to the 1st st (20)

F/O, secure and leave a tail for sewing. 

FACE with cream, 3.75mm (F) hook

  Row 1: ch21, sc in 2nd ch from hook and across, ch1, turn (20)

  Row 2: 2sc in next st, sc in next 18 sts, 2sc in next st, ch1, turn (22)

  Row 3: 2sc in next st, sc in next 20 sts, 2sc in next st, ch1, turn (24)

  Row 4: 2sc in next st, sc in next 22 sts, 2sc in next st, ch1, turn (26)

  Row 5: sc in each st around, ch1, turn (26)

  Row 6: 2sc in next st, sc in next 24 sts, 2sc in next st, ch1, turn (28)

  Row 7- 9: sc in each st around, ch1, turn (28)

  Row 10: sc2tog, sc in next 24 sts, sc2tog, ch1, turn (26)

  Row 11: sc2tog, sc in next 22 sts, sc2tog, ch1, turn (24)

  Row 12: sc2tog, sc in next 7 sts, sc2tog, ch1, turn (9)

  Row 13: sc2tog, sc in next 7 sts, ch1, turn (8)

  Row 14: sc2tog, sc in next 6 sts, ch1, turn (7)

  Row 15: sc2tog, sc in next 5 sts, ch1, turn (6)

  Row 16: sc2tog, sc in next 4 sts, ch1, turn (5)

  Row 17: sc2tog, sc, sc2tog (3)

  Row 18: sc3tog (1)

F/O, secure and weave in the ends.

Attach yarn on the 14th st from round 11.

  Row 12: sc2tog, sc in next 7 sts, sc2tog, ch1, turn (9)

  Row 13: sc2tog, sc in next 7 sts, ch1, turn (8)

  Row 14: sc2tog, sc in next 6 sts, ch1, turn (7)

  Row 15: sc2tog, sc in next 5 sts, ch1, turn (6)

  Row 16: sc2tog, sc in next 4 sts, ch1, turn (5)

  Row 17: sc2tog, sc, sc2tog (3)

  Row 18: sc3tog (1)

DO NOT F/O, ch1, turn, sc in each st around the entire piece, join with an invisible join to the 1st st

F/O, secure and leave a tail for sewing.

BRAIDS

Cut 18 pieces of yarn (9 for each earflap) about 36 inches long. Fold each bunch in half and push the folded end through an opening in the bottom of each earflap. Pull the unfolded ends through the loop and pull tight. Braid the strands and tie a knot to secure the braid. Complete the second braid the same way.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).
     EARS...there’s no need to stuff them, simply flatten them out. Place them between rounds 5 and 9 for both sizes.

     FACE...place it between rounds 7 and 16. for size toddler beanie. Place it between rounds 9 and 19 for size child/adult beanie.

      EYES to FACE...using black embroidery floss or yarn, embroider the eyes between rows 11 and 12; approx. 5 sts wide for both sizes.

     MOUTH to FACE...using black embroidery floss or yarn, embroider the mouth between rows 4 and 5; approx. 9 sts wide for both sizes.

     TEETH...using white felt. Cut out 2 little triangles and glue them on each end of the mouth for both sizes.

Would you like to make a cute cuddly Snorlax plushie to go with the beanie?😊

You can find the pattern --> HERE

GLOSSARY:

ch/s: chain/s || f/o: finish off || hdc: half double crochet || rnd: round || sc: single crochet

sc2tog: single crochet 2 stitches together || sc3tog: single crochet 3 stitches together || sl st: slip stitch

st/s: stitch/es || y/o: yarn over 

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice crochet time!
- Janet

Snorlax and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" ( 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Snorlax Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: windsor blue & small amounts of cream, black & white
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with windsor blue yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Rnd 1: k8, k2tog around

  Rnd 2 and all even rnds: knit around

  Rnd 3: k7, k2tog around

  Rnd 5: k6, k2tog around

  Rnd 7: k5, k2tog around

  Rnd 9: k4, k2tog around

  Rnd 11: k3, k2tog around

  Rnd 13: k2, k2tog around

  Rnd 15: k1, k2tog around

  Rnd 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

NOTE: The ears are worked all in one piece and then folded in half.

EARS with windsor blue; make 2

CO 1 stitch with the 5.0mm needles

  Row 1: kfb (2sts)

  Row 2: knit across (2sts)

  Row 3: kfb, kfb (4sts)

  Row 4: knit across (4sts)

  Row 5: kfb, p2, kfb (6sts)

  Row 6: kfb, k4, kfb (8sts)

  Row 7: kfb, p6, kfb (10sts)

  Row 8: knit across (10sts)

  Row 9: purl across (10sts)

  Row 10: knit across (10sts)

  Row 11: purl across (10sts)

  Row 12: knit across (10sts)

  Row 13: purl across (10sts)

  Row 14: knit across (10sts)

  Row 15: purl across (10sts)

  Row 16: purl across (10sts)

  Row 17: purl across (10sts)

  Row 18: knit across (10sts)

  Row 19: purl across (10sts)

  Row 20: knit across (10sts)

  Row 21: purl across (10sts)

  Row 22: knit across (10sts)

  Row 23: purl across (10sts)

  Row 24: k2tog, k6, k2tog (8sts)

  Row 25: p2tog, p4, p2tog (6sts)

  Row 26: k2tog, k2, k2tog (4sts)

  Row 27: purl across (4sts)

  Row 28: k2tog x2 (2sts)

  Row 29: purl across (2sts)

  Row 30: slip1, knit 1, psso

F/O and draw through the remaining stitch. Weave in the ends.

Fold the ear in half along row 16. Using the 3.75mm (F) crochet hook, single crochet along the entire ear to close it off. F/O, weave in all ends.

Another method you can use if you're not comfortable crocheting, use a tapestry needle and whip stitch along the entire ear to close it off.

ASSEMBLE
     I recommend pinning the pieces before sewing them to make sure you have them in the position you like best before sewing. (Most people prefer to use the yarn at the end of the finished pieces to sew them in place, but I use matching thread).

     EARS...lay out the beanie flat and find the position you like best.

Note: right-click on the image and open the image in a new tab to enlarge and print out.
The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

co: cast on || k: knit || k2tog: knit 2 stitches together || kfb: knit front and back || p: purl

p2tog: purl 2 stitches together || psso: pass slipped stitch over || rnd/s: round/s || st/s: stitch/es

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Janet

Snorlax and Pokemon are copyrighted by The Pokemon Company.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (April 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Kirby Beanie (knit)

By Janet Carrillo "damn it Janet, let's crochet!"

    Simple but yet very stylish; for boys and girls of all ages. You can comfortably wear it during any season depending on the yarn you used and the weather, of course. This is an easy-to-knit beanie if you know the basics knit, purl and k2tog.

SIZE/MEASUREMENTS
Child (6yrs - 10yrs) [19" to 20" head circumference]
Teen/Small Adult [20" to 21" head circumference]

Adult (men) [21" to 23" head circumference]

MATERIALS
*Worsted Weight Yarn: Main Color & small amounts of 2 shades of pink, black, white and light blue
*DPN's or Circular Needles: 4.5mm & 5.0mm
*Stitch Marker to mark your rounds
*Tapestry Needle

GAUGE
Using 5.0mm needles...  4.5 stitches x  6 rows = 1"
Don't forget to check your gauge.

PATTERN NOTES
  This pattern can either be knitted when making the hat or duplicate stitched on afterward; the choice is yours. Here's a great video on how to duplicate stitch; HERE.

STARTING the BEANIE

CO 80 (90, 90) sts on 4.5mm needles with main color yarn.

Place a marker and join in the round, being careful not to twist the stitches.

Do ribbing (k1, p1) for 1 inch (approx. 6 rounds).

Change to larger needles and proceed knitting for 4 (4.5, 5) inches. This will give you approx. 27 (32, 37) rounds. Please follow the graph to know in which rows to do the color changes.

SHAPING the CROWN

  Row 1: k8, k2tog around

  Row 2 and all even rows: knit around

  Row 3: k7, k2tog around

  Row 5: k6, k2tog around

  Row 7: k5, k2tog around

  Row 9: k4, k2tog around

  Row 11: k3, k2tog around

  Row 13: k2, k2tog around

  Row 15: k1, k2tog around

  Row 17: k2tog around

Leave a tail (up to 8"). You will use a tapestry needle to thread the tail through the last remaining stitches on your needle. After removing the needles from the stitches, pull tightly to close the top hole. Lastly, hide the tail inside and weave it in.

Note: right-click on the image and open the image in a new tab to enlarge and print out.
The grid lines on the pattern graph may look uneven on your monitor but will print out evenly.

Child size is up to the red line.
Teen/Small Adult size is up to the green line.
Adult (men) size is the full graph.

GLOSSARY:

CO: cast on || k: knit || p: purl || k2tog: knit 2 stitches together

Don't forget to like this blog's Facebook page.

Or follow us on Instagram. :)

Have a nice knit time!
- Janet

Kirby is copyrighted by Hal Laboratory and Nintendo.

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (January 2024). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.