Pikachu Slippers (child/teen size)

By Janet Carrillo "damn it Janet, let's crochet!"

     Pikachu, I choose you! Make the right decision and make these adorable slippers. They'll bring so much joy and friendship to anyone that wears them. Pikachu promises to keep your feet warm no matter what battle faces you.

SIZE/MEASUREMENTS
These slippers fit someone with an 8.5" foot or a 3US Kids shoe size
You're able to easily customize the slippers by adding less or more rounds/rows to fit someone with a smaller or larger foot (indications on how to do so are below on row 15-24).

MATERIALS
*Crochet hook size: 3.75mm (F) or size needed to obtain gauge
*Worsted Weight Yarn: Yellow (155yds) & Black (8yds)
*Felt: Black, White & Red
*Fiberfill (optional)
*Stitch Markers to mark your rounds
*Tapestry Needle
*Matching Thread
*Hot Glue

GAUGE 8stitches x 5rows = 2"
Don't forget to check your gauge.

PATTERN NOTES - must read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first st, not on top of the chains.

SLIPPER with yellow; make 2
  Rnd 1: 5sc in magic ring, sl st into 1st st (5)
  Rnd 2: ch2, 2dc in each st around, sl st into 1st st (10)
  Rnd 3: ch2, 2dc in each st around, sl st into 1st st (20)
  Rnd 4: ch2, *2dc in next st, dc in next st* repeat from * to * around, sl st into 1st st (30)
  Rnd 5: ch2, *2dc in next st, dc in next 5 sts* repeat from * to * around, sl st into 1st st (35)
  Rnd 6-13: ch2, dc in each st around, sl st into 1st st (35)
  Row 14: ch2, dc in next 24sts, ch2, turn (24)
  Row 15-24: dc in each st across, ch2, turn (24) in the last row, do not turn your work.
You can make the slippers smaller or larger by simply making fewer rows or adding more rows at this point.

  Rnd 25: ch1 and sc along the top as indicated in the picture below but in each corner put 2sc. This will give the slippers a finished look.
  Rnd 26: ch1, sc in each st around
F/O and leave about a 36" strand of yarn (it will be used for sewing the back of the slipper together in the assembling process).

EARS starting with black; make 4
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in each st around (4)
  Rnd 3: 2sc in next st, sc in next st around (6)
  Rnd 4: 2sc in next st, sc in next 2 sts around, in last st change to yellow (8)
  Rnd 5-11: sc in each st around (8)
  Rnd 12: sc in next 2 sts, sc2tog around, sl st into 1st st (6)
F/O, secure and weave in the ends.


ASSEMBLE
    I recommend pinning the pieces in place before sewing them to make sure you have them in the position you like best before sewing. (Most people like to use the yarn at the end of the finished pieces to sew them in place, but I personally like to use matching thread).
    TIP...For anything that I’m going to be using felt, I like to first sketch it out on a white paper and make a stencil of what I need. Then cut it out. Then tape the stencil to the felt and cut it out.
     SLIPPERS...turn your slipper inside out. With a tapestry needle and by using the whip stitch seam, sew the back of the heel with the long strand of yarn we left. Secure and weave in the end.

     When sewing anything on booties or slippers, I like to stuff the front with tissue paper or fiberfill because this helps me to better sew the pieces in place and they won’t end up uneven. After everything has been sewn and/or glue in place just remove the tissue paper or fiberfill.
     EARS...you can stuff them lightly if you like or simply flatten them out. If you decide to flatten them, they won't be droopy at all. Place them diagonally on the 2 final rounds we made at the end of the slippers (round 25 & 26).

     EYES...using black felt make 2 circles and another 2 using white felt but make these much smaller. Place the black circles on round 10; approx. 1.25" apart. The tiny white circles go on the top of the black circles. Repeat the same process with the other slipper.

     CHEEKS...using red felt make 4 circles. You'll want them to be a bit bigger than the eyes (the black circles). Place them on round 8 and 9 just right beneath the eyes on the sides.

     MOUTH...using black thread or embroidery floss make the mouth in round 7. You can play around with it and make it however you like, the possibilities are endless. If you would like to make the mouth as shown in the main picture, follow these simple steps below (click on each image to enlarge).

     NOSE...just right above the mouth make a tiny vertical line with black thread or embroidery floss.

GLOSSARY:

ch/s:chain/s || sc: single crochet || dc: double crochet || sl st: slip stitch || st/s: stitch/es || rnd: round || f/o: finish off

Don't forget to like this blog facebook fan page.

Or to follow our Instagram page. :)

Have a nice crochet time!
- Janet

Pikachu and Pokémon are copyright by The Pokémon Company.
This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (December 2017). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Pikachu Slippers (toddler size)

By Janet Carrillo "damn it Janet, let's crochet!"

     Pikachu, I choose you! Make the right decision and make these adorable slippers. They'll bring so much joy and friendship to anyone that wears them. Pikachu promises to keep your feet warm no matter what battle faces you.

SIZE/MEASUREMENTS
These slippers fit someone with an 5" foot or a 5.5c US Infants shoe size
You're able to easily customize the slippers by adding less or more rounds/rows to fit someone with a smaller or larger foot (indications on how to do so are below on row 11-15).

MATERIALS
*Crochet hook size: 3.75mm (F) or size needed to obtain gauge
*Worsted Weight Yarn: Yellow (80yds) & Black (6yds)
*Felt: Black, White & Red
*Fiberfill (optional)
*Stitch Markers to mark your rounds
*Tapestry Needle
*Matching Thread
*Hot Glue

GAUGE 8stitches x 5rows = 2"
Don't forget to check your gauge.

PATTERN NOTES - must read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first st, not on top of the chains.


SLIPPER with yellow; make 2
  Rnd 1: 5sc in magic ring, sl st into 1st st (5)
  Rnd 2: ch2, 2dc in each st around, sl st into 1st st (10)
  Rnd 3: ch2, 2dc in each st around, sl st into 1st st (20)
  Rnd 4: ch2, *2dc in next st, dc in next 3 sts* repeat from * to * around, sl st into 1st st (25)
  Rnd 5-9: ch2, dc in each st around, sl st into 1st st (25)
  Row 10: ch2, dc in next 17sts, ch2, turn (17)
  Row 11-15: dc in each st across, ch2, turn (17) in the last row, ch1 and turn your work.
You can make the slippers larger by simply adding more rows at this point.

  Rnd 16: sc along the top as indicated in the picture below but in each corner put 2sc. This will give the slipper a finished look.
  Rnd 17: ch1, sc in each st around
F/O and leave about a 25" strand of yarn (it will be used for sewing the back of the slipper together in the assembling process).

EARS starting with black; make 4
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in each st around (4)
  Rnd 3: 2sc in next st, sc in next st around, in last st change to yellow (6)
  Rnd 4-8: sc in each st around (6)
  Rnd 9: sc in next st, sc2tog around, sl st into 1st st (4)
F/O, secure and weave in the ends.


ASSEMBLE
    I recommend pinning the pieces in place before sewing them to make sure you have them in the position you like best before sewing. (Most people like to use the yarn at the end of the finished pieces to sew them in place, but I personally like to use matching thread).
    TIP...For anything that I’m going to be using felt, I like to first sketch it out on a white paper and make a stencil of what I need. Then cut it out. Then tape the stencil to the felt and cut it out.
     SLIPPERS...turn you slipper inside out. With a tapestry needle and by using the whip stitch seam, sew the back of the heel with the long strand of yarn we left. Secure and weave in the end.

     When sewing anything on booties or slippers, I like to stuff the front with tissue paper or fiberfill because this helps me to better sew the pieces in place and they won’t end up uneven. After everything has been sewn and/or glue in place just remove the tissue paper or fiberfill.
     EARS...you can stuff them lightly if you like or simply flatten them out. If you decide to flatten them, they won't be droopy at all. Place them diagonally on the 2 final rounds we made at the end of the slippers (round 16 & 17).

     EYES...using black felt make 2 circles and another 2 using white felt but make these much smaller. Place the black circles on round 7; approx. 1" apart. The tiny white circles go on the top of the black circles. Repeat the same process with the other slipper.

     CHEEKS...using red felt make 4 circles. You'll want them to be a bit bigger than the eyes (the black circles). Place them on round 5 and 6 just right beneath the eyes on the sides.

     MOUTH...using black thread or embroidery floss make the mouth in round 5. You can play around with it and make it however you like, the possibilities are endless.

     NOSE...just right above the mouth make a tiny vertical line with black thread or embroidery floss.

GLOSSARY:

ch/s:chain/s || sc: single crochet || dc: double crochet || sl st: slip stitch || st/s: stitch/es || rnd: round || f/o: finish off

Don't forget to like this blog facebook fan page.

Or to follow our Instagram page. :)

Have a nice crochet time!
- Janet

Pikachu and Pokémon are copyright by The Pokémon Company.
This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (December 2017). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Baby Owl Booties (newborn - 3 months old)

By Janet Carrillo "damn it Janet, let's crochet!"

These were inspired by several owl booties I saw while searching through Google.
Aren't they adorable? A must have for your newborn.

SIZE/MEASUREMENTS
newborn - 3 months old (3.5" sole)

MATERIALS
*Crochet hook size: 4.0mm (G)
*Worsted Weight Yarn: Brown (15yds), Pink (22yds), White (6yds) & Orange (3yds) or any color of choice
*Stitch Markers to mark your rounds
*2 - 12mm pink buttons for straps
*4 - 10mm black buttons for eyes
*2 small flowers
*Tapestry Needle
*Matching Thread
*Hot Glue

PATTERN NOTES - must read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first sc, not on top of the chain 1.

SPECIAL STITCHES
Other side of the foundation chains - this VIDEO explains how to do this technique.
Invisible join - this VIDEO explains how to do this technique.


SOLE with brown
  Rnd 1: ch11, 2sc in 2nd ch from hook, sc in next 2 chs, hdc in next 3 chs, dc in next 3 chs, 6dc in last ch, other side of the foundation chains dc in next 3 chs, hdc in next 3 chs, sc in next 2 chs, sc in last ch, sl st into 1st st (25)
  Rnd 2: ch1, 2sc in the same st you sl st, sc in next 9 sts, 2sc in next 2 sts, sc in next 2 sts, 2sc in next 2 sts, sc in next 9 sts, sl st into 1st st (30)
  Rnd 3: ch1, sc in the same st you sl st, sc in next st, 2sc in next st, sc in next 10 sts, 2hdc in next 2 sts, sc in next 2 sts, 2hdc in next 2 sts, sc in next 10 sts, 2sc in last st, sl st into 1st st (36)

F/O, secure and weave in the ends. Attach the pink yarn where you sl st from previous round.

UPPER PART with pink

  Rnd 4: working in back loops for this round only ch1, sc in the same st you sl st and sc in each st around, sl st into 1st st (36)
  Rnd 5: ch1, sc in the same st you sl st, sc in next 14 sts, hdc2tog, hdc in next 5 sts, hdc2tog, sc in next 12 sts, sl st into 1st st (34)
  Rnd 6: ch1, sc in the same st you sl st, sc in next 2 sts, sc2tog, sc in next 6 sts, hdc2tog, hdc in next 2 sts, dc in next 8 sts, hdc in next 2 sts, hdc2tog, sc in next 3 sts, sc2tog, sc in next 2 sts, sl st into 1st st (30)
  Rnd 7: ch1, sc in the same st you sl st, sc in next 9 sts, hdc2tog, hdc2tog, hdc2tog, hdc in next 2 sts, hdc2tog, hdc2tog, hdc2tog, sc in next 6 sts, sl st into 1st st (24)
  Rnd 8: (LEFT bootie) ch1, sl st in the same st you sl st and ch1, sl st in next 18 sts, ch12, sc in the 7th ch from hook and in next 5 chs, continue to sl st around the bootie,  join to 1st st with the invisible join
  Rnd 8: (RIGHT bootie) ch1, sl st in the same st you sl st and ch1, sl st in next 8 sts, ch12, sc in the 7th ch from hook and in next 5 chs, continue to sl st around the bootie, join to 1st st with the invisible join

F/O, secure and weave in the ends.

EYES with white; make 4
  Rnd 1: 8hdc in magic ring, join to 1st st with the invisible join

F/O, secure and weave in the ends.

NOSE with orange; make 2
  Row 1: ch4, sl st in 2nd ch from hook, hdc in next ch, dc in last ch (3)

F/O, secure and weave in the ends.

ASSEMBLE
     I recommend pinning the pieces in place before sewing them to make sure you have them in the position you like best before sewing. (Most people like to use the yarn at the end of the finished pieces to sew them in place, but I personally like to use matching thread).
     Sew the 12mm buttons for the straps.
     EYES...you want to place the eyes close to each other on the very top center of the booties. Sew the 10mm buttons on top of the white part of the eye.
     PEAK...I place them a little under the eye and sew it in place.
     The little flowers I found them at my local yarn store. I use hot glue to place them in the booties.

Moster Lene kindly translated the pattern in Danish. If you would like the pattern in Danish it can be found here.
 

GLOSSARY:

ch/s:chain/s || sc: single crochet || hdc: half double crochet || dc: double crochet || sl st: slip stitch || st/s: stitch/es
sc2tog: single crochet 2 stitches together || hdc2tog: half double crochet 2 stitches together
rnd: round || f/o: finish off

Don't forget to like this blog facebook fan page.

Or to follow our Instagram page. :)

Have a nice crochet time!
- Janet

This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (August 2012). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

Mary-Jane Slippers

I wanted to take this picture without my socks since I ♥ my tattoo. I wanted to show it off. :)

  I haven't made myself anything in awhile. Since its starting to get cold, I decide to make myself some slippers. If my feet are not well cover when its cold my right leg starts hurting cause I hurt my leg when I was 15yrs. old while playing soccer.
  I search slippers in Ravelry and found these real cute ones; the Mary-Jane Slippers. They're real easy to make even a beginner could crochet these. Each slipper is made in one piece, so there are no seams and its done in single crochet. I finish mine in about an hour. I absolutely love them that I'm going to be making a few more pairs for myself and some for my sister since she love them as well. :)

- Janet Carrillo